Login with username, password and session length
0 Members and 1 Guest are viewing this topic.
2) I don't agree that an excess is needed (defined as more than a hint of oil on the surface or small amount of pooling). at my local TA if an "excess" occurs which don't seem that often (observing from the counter) the chef skims off the excess into a tin (from the frying pan)
square peg and only round holes in sight!this is something i've pondered off and on and never resolved. Secret Santa has mentioned it several times in the past. the last few posts (pg 5) in the jb post on, "spiced oil in base" prompted the post.this is what i know:1) oil is needed to make a top notch BIR. 2) i don't agree that an excess is needed (defined as more than a hint of oil on the surface or small amount of pooling). at my local TA if an "excess" occurs which don't seem that often (observing from the counter) the chef skims off the excess into a tin (from the frying pan)3) the colour of this oil is red and can be "hot" spiced down to chilli (observed from purchased dishes)4) the colour of the curry gravy oil is yellow5) from direct experience i know that recycling curry gravy oil through a number of batch of base (say 3 off) improves the intensity of the oil. Nb i no longer do this as i use marg which limits the shelf life.6) using more oil at frying stage significantly eases the cooking process ie if time was not an issue use more oil and skim it offso the question is where is this skimmed oil used. given jb's recent find that even pre cook chicken liquid is saved - i am pretty sure this "curry gold" is not binned.i can't put hand on heart and say it does not go back into the base in some BIR - but at my local TA i am pretty sure it can't as the yellow and red oil don't mix.the only place i can find is the bunjarra.all thoughts very welcome to hopefully put this one "niggle" to bed.