Author Topic: How do I get the oil to rise to the surface of a curry base?  (Read 4272 times)

0 Members and 1 Guest are viewing this topic.

Offline ted_paper

  • Junior Chef
  • *
  • Posts: 2
    • View Profile
Hi,
This is my first post after browsing the forum and trying a couple of base sauce recipes. My problem is that the oil does not seem to separate at any stage during cooking or blending! Am I missing something?
Thanks 
« Last Edit: October 04, 2009, 10:29 AM by Cory Ander »

Offline SnS

  • Curry Spice Master
  • ******
  • Posts: 975
    • View Profile
Re: Oil floating
« Reply #1 on: March 23, 2008, 10:13 PM »
Hi Ted.

Welcome to the forum.

Firstly, some don't rate the oil separation as important as others. I think it may be important, so I like to see at least some.

At the end of the day, I suppose it all depends on which bases you've tried and whether oil separation should be expected, as the recipe says.

If the recipe says the oil should start to separate at a particular point, then generally that's what should happen.

SnS  ;D

Offline Bobby Bhuna

  • Elite Curry Master
  • *******
  • Posts: 1221
    • View Profile
Re: Oil floating
« Reply #2 on: March 23, 2008, 11:09 PM »
Hey there and welcome.

In general, the oil will rise to the suface after blending and simmering gently for a while. Thick bases (e.g. the popular Darth base) tend not to give up much oil, wheras thinner bases (e.g. the also popular Saffron base) seem to be keen to let it rise to the surface.

For me, the key is very gentle heat for a fairly long period of time. The base gets darker and the oil floats to the surface. I'm lead to believe that many BIRs make their large pot  of base and leave it on a gentle heat all night so that it's always ready to use. This suggests that the prolonged simmering won't damage the base sauce.

Hope this helps! :)

Offline ted_paper

  • Junior Chef
  • *
  • Posts: 2
    • View Profile
Re: Oil floating
« Reply #3 on: March 24, 2008, 07:30 AM »
My sauces were fairly dense so that might explain things...
Thanks for your reassurances!!

Offline tonymexico

  • Chef
  • *
  • Posts: 14
    • View Profile
Re: Oil floating
« Reply #4 on: July 11, 2008, 01:41 AM »
My sauces were fairly dense so that might explain things...
Thanks for your reassurances!!
Dear Ted, you might find it helpful to have a kettle of boiling water on standby when you cook your sauces and curries. Sometimes the heat and different ingredients make the sauce a little too thick. Never add cold water as this not only affects the cooking process, it will wash out a lot of the essential oils released by the spices. The water also helps the oil to have something to float upon, just don't add to much at a time more can always be added but its harder to dry the sauce out if you over wet it. I find about 2-3 tablespoons at a time works fine.

Offline JerryM

  • Genius Curry Master
  • **********
  • Posts: 4585
    • View Profile
Re: Oil floating
« Reply #5 on: July 11, 2008, 08:11 AM »
above answers sum it up (thin/watery, lowest simmer, time ~hrs not mins).

only thing i've noticed is if u stir during the simmer u will keep the oil in the base, if u leave it without stirring it will eventually rise and separate.

http://www.curry-recipes.co.uk/curry/index.php?topic=2684.msg23835#msg23835

Offline SKAZE

  • Chef
  • *
  • Posts: 40
    • View Profile
Re: Oil floating
« Reply #6 on: October 19, 2008, 05:04 PM »
I did the bruce base and curry last night and when cooking the main dish the oil didnt really seperate, what do i need to do to make this happen?

Offline JerryM

  • Genius Curry Master
  • **********
  • Posts: 4585
    • View Profile
Re: Oil floating
« Reply #7 on: October 20, 2008, 07:07 AM »

Offline kid curry

  • Senior Chef
  • **
  • Posts: 69
    • View Profile
Re: Oil floating
« Reply #8 on: October 21, 2008, 03:45 PM »
Yes bobby is right somtimes they will cook overnight or first thing in the morning so the base can simmer for a good few hours.

 

  ©2024 Curry Recipes