Login with username, password and session length
0 Members and 1 Guest are viewing this topic.
How hot do the spices have to get to extract the most flavour from them please?If its over 100C, does this mean that I have to add the dry spices to the hot oil (at 200C plus) before i add anything else containing water? Because as soon as I add water (like in onions or pastes) the temperature will struggle to get above 100C (and will probably be about 85C on a domestic hob) wont it? Will the flavour of the spices still be released ok at 100C and below?
Quote from: smokenspices on March 24, 2008, 01:30 PMCan you try your experiment again please (with IR thermometer), but this time make a thick spice paste using only a little water.Yes, i can and will do that. It seems like a sensible thing to do. Ill also do it with a paste in oil and with just adding dry powders too.
Can you try your experiment again please (with IR thermometer), but this time make a thick spice paste using only a little water.
Domi ,irrespective of his perceived tone ,(which I don't really see being anything other than a little direct and impersonal), I'd still like to know the answers to the questions he poses or can't anyone actually give an answer ?
Hi ApprenticeI think if you read carefully through this thread you will find the questions have been answered.In summary:-1) The spice powder requires heat to release flavour, aroma and remove the "rawness". Ideally the oil temperature should be at 160-180C and the spices fried for a few seconds. If it is hotter than this then you risk burning the spices. Below this temperature and you will require a slightly longer period of frying. If the oil is too cool, the spices wont fry at all. The ideal temperature is found by experience, not by measuring. The frying time (in seconds) will vary depending on oil temperature, quantity and type of spices (plus other less influencing factors).2) If you add water (as in spice paste) into hot oil there will be a cooling effect caused by a) the water being at a lower temperature than the oil and b) the evaporation of water into steam (this being the greatest cooling effect of the two). The cooling effect (b) remains until all the water has evaporated. If you add oil/spice paste to hot oil the cooling effect will be much less as there is no evaporation. If you add only spices (no water, no oil) to hot oil the cooling effect will be almost negligible.SnS ;D
Thank you SnS , that is much more helpful ,however , how will I know when the spices have reached the required temperatures ? And how will I know if I have cooked it for long enough OR over cooked it ?
There is no definitive answer, but the aroma is probably the best indication. Spices will also darken (but not black - or it's burnt!). Try frying spice powders only (not paste) in hot oil, for 30 seconds (stirring continuously) and work from there. Unfortunately this does take practice. Whole spices will take much longer, some more than others.SnS ;D