Curry Recipes Online
Curry Base Recipes => Curry Base Chat => Topic started by: Aussie Mick on March 30, 2012, 08:12 AM
-
G'day all
I was wondering whether oil separation makes a lot of difference in a base sauce. I have just made up my 3 rd batch of Chewy's base sauce. I followed the instructions religously, strained the sauce then put it back on the heat for a good hour. I lost over a litre in evaporation, but the oil still didn't separate.
The best I got was a foam on the top, not a "scum". Each time I have had the same result.
The sauce does make a fantastic curry, so I am not too worried, but I wondered what I was doing wrong ???
I think the only thing that I do use that is different is filtered water, as Perth's drinking water isn't the best, maybe that is why no scum appears.....i don't know.
It would be nice to see all that oil on the top though!!
(http://img.photobucket.com/albums/v625/mickey-t/017-1.jpg)
(http://img.photobucket.com/albums/v625/mickey-t/016-1.jpg)
-
Did you put much oil into the base Mick? You can see traces of oil in the froth on top, so it has separated. Maybe use more oil in the base if you want more oil to separate?
-
Did you put much oil into the base Mick? You can see traces of oil in the froth on top, so it has separated. Maybe use more oil in the base if you want more oil to separate?
Hi VC
I followed Chewys recipe to the letter. I.E. 200ml of oil.
-
That last picture clearly shows a nice glossy sheen of oil on the top, Mick, so you've definitely got some separation going on there.
But losing over a litre in evaporation might suggest that you've got the heat too high for the final cooking stage. You're after a delicate 'tickover' simmer, rather than a vigorous simmer or bubbling boil. And keep the lid on. (This may differ from what Chewy and others do, but this is what I've found works for me.)
The mysteries of the base are many and various. Despite using the same ingredients, cooked in exactly the same way, in the same pan and using the same heat, no two bases seem to turn out exactly the same. It may be something to do with some bizarre planetary alignment, but I sometimes find that I don't initially get much separation after the second cook stage, but then I leave it off the heat for a few hours (again, with the lid on), and when I return, there it is.
But the proof of the pudding is in the eating, as the saying goes, so if it makes a good curry I wouldn't worry about t too much.
-
It could be because I assume we are, presumably, all in Oz, and technically upside down; therefore the oil has risen to the bottom of the pan?
There's 450ML in the base I use, you get a bit of oil on the top, it could be that the base will only deliver that much up.
SD has a point, if you are getting that much evaporation the heat might be too high under the stockpot.
-
That last picture clearly shows a nice glossy sheen of oil on the top, Mick, so you've definitely got some separation going on there.
But losing over a litre in evaporation might suggest that you've got the heat too high for the final cooking stage. You're after a delicate 'tickover' simmer, rather than a vigorous simmer or bubbling boil. And keep the lid on. (This may differ from what Chewy and others do, but this is what I've found works for me.)
The mysteries of the base are many and various. Despite using the same ingredients, cooked in exactly the same way, in the same pan and using the same heat, no two bases seem to turn out exactly the same. It may be something to do with some bizarre planetary alignment, but I sometimes find that I don't initially get much separation after the second cook stage, but then I leave it off the heat for a few hours (again, with the lid on), and when I return, there it is.
But the proof of the pudding is in the eating, as the saying goes, so if it makes a good curry I wouldn't worry about t too much.
Thanks SD
I will try this next time.
I didn't want it to burn, which is why I was (more or less) constantly stirring it.
OK next time, low light, lid on and see what happens. :)
-
LOL. Cheers VC
Never thought being "Down Under" might be tricking the oil. ;D
-
Thanks SD
I will try this next time.
I didn't want it to burn, which is why I was (more or less) constantly stirring it.
OK next time, low light, lid on and see what happens. :)
Ah... Yes, constantly stirring it would have the effect of returning the oil to the emulsion. If you get the heat as low as possible so it's just ticking over (and keep the lid on), it shouldn't burn, and you won't lose anything through evaporation.
I've yet to burn a base in this way.
-
Gotcha SD.
I'll snap pictures next time.
Cheers
Mick
-
Hi Mick
Your photos look nearly there, that scum IS the oil forming.
The second part of my recipe=
To finish it off, you can do it two ways, but either way you have to thin it down with plenty of water.
1. Quick way is to bring it back to a rolling boil with a lid on, important that you give it a stir
every few minutes as the onion sediment gathers on the outer edge at the bottom of your pan
and can overcook. The trick is that the oil will separate and be carried up with the steam. If you
check inside your lid, after say 15 mins, there should be little droplets of oil stuck to it. How long you boil varies,
but once I get a scum forming and an red/brown oil slick around the outer edge of the pan, I turn it down to a simmer and then off.
2. The slow way, is to bring it to the boil then turn down to a low heat simmer, give it a stir
now and then, until you get the scum/oil. ( always keep a lid on until you get the oil)
It doesn't really matter if it doesn't release loads of oil, as once you've scooped most of the scum off,
you should give the pan a good stir and the oil will mix back in.
(http://www.curry-recipes.co.uk/imagehost/pics/624fbf8565d4fa3b0e3cb60d309254ee.jpg) (http://www.curry-recipes.co.uk/imagehost/#624fbf8565d4fa3b0e3cb60d309254ee.jpg)
Cheers Chewy
-
Thanks Chewy.
I will take that on board for the next batch mate.
The photo you have posted looks silky smooth in comparison to my effort, but I WILL get there.
Practice makes pefect! :)
At the end of the day, the curries taste fantastic, and the good news for me is that they can only get better.
Cheers Mick
-
Hi Mick
Just as a point of reference ;)
I've uploaded a video clip of how my finished curry base texture looks.
Not a great deal of oil in there, but I only use 200ml max in my recipe to start with.
And even this finished base could stand another litre of water.
Hope this helps
cheers Chewy
http://www.southtyneside.com/sizzler/finishedbase.html (http://www.southtyneside.com/sizzler/finishedbase.html)
-
Thanks again Chewy.
I have noticed that too. i started cooking yesterday, and I did add more water to the base as I went along, as the curries were really thickening up very quickly. I reckon I got a good 6 litres out of this last batch. I cooked 9 curries yesterday. i have just cooked a triple version of korma, and I have put enough for 12 more curries in containers in the freezer.
Really happy with the results. :) :) Curry is tasty and the right consistency.
-
Hi Mick
Just as a point of reference ;)
I've uploaded a video clip of how my finished curry base texture looks.
Not a great deal of oil in there, but I only use 200ml max in my recipe to start with.
And even this finished base could stand another litre of water.
Hope this helps
cheers Chewy
http://www.southtyneside.com/sizzler/finishedbase.html (http://www.southtyneside.com/sizzler/finishedbase.html)
This looks the same as my last batch of slow cooker base. I might write it up as a separate recipe as it's a low stress method which eliminates fear of burning, over evaporation, etc and might be of interest to anyone who's not in a hurry to get their base ready.
I spotted cider vinegar in the background of the shot - what do you use this for chewy? I've never come across it before. Well I suppose it's always been there in supermarkets but I've never noticed it and wouldn't know what it's good for.