Curry Recipes Online
Curry Chat => Lets Talk Curry => Topic started by: 976bar on October 01, 2009, 07:49 AM
-
Ok, yesterday I decided to make some more base. Jerry kindly assisted me on which bases to choose from based upon his likes/dislikes and ratings, as I think Jerry has experimented quite a lot with different recipes on here, and I tend to trust his judgement. Many thanks Jerry, keep up all the good work. :)
In the end I decided on the revised SnS base, please see the link below. I followed the instructions to the letter and started to cook my base. I add the 500ml of oil as I wanted to reclaim the oil for further use in my curries.
The problem is that the oil has not separated from the base and I now have a base with 500ml of oil in it, which has made it quite thick. :(
Where has it all gone wrong? and what can I do with this base now?
Any input on this would be mostly appreciated.
As most of you will be aware, I was invited by Raj (the manager) to spend a few hours in the kitchens of Saffron in Lincoln. Yesterday lunch time I spent 3 hours learning how to make the base gravy with Saffron's four chefs (Anam, Aziz, Lal and Joy).
Kitted out in full chefs outfit, notebook and pen I was told that the gravy we were about to make is used in about 80% of their curries. Raj told me that the batch we were making was for me to take home ... oh deep joy (this filled a 5 kg yoghurt bucket).
So here it is chaps:-
Please Note: An update to this recipe has been supplied here (please click link): http://www.curry-recipes.co.uk/curry/index.php/topic,2271.msg20262.html#msg20262 (http://www.curry-recipes.co.uk/curry/index.php/topic,2271.msg20262.html#msg20262)
-
I don't usually reclaim any oil, I like to leave it in. Just use a lot less at the curry cooking stage (about 1 - 2 tbsps) and after about 5 minutes cooking the oil will start to separate which is a good indicator that the curry is done.
The Saffron base cooking sounds like great fun. I look forward to reading your thoughts on it. Did you learn anything that we didn't already know?
-
well impressed on your saffron visit - i love the base.
on the oil all u need is here http://www.curry-recipes.co.uk/curry/index.php?topic=2684.0
(http://www.curry-recipes.co.uk/curry/index.php?topic=2684.0)
i always take the oil off before blending nowadays to avoid the phaffing.
the way to get the oil out is to add a lot of water - try 500ml 1st followed by upto say a further litre. get the base on low simmer and stir very little. there is a stir action that u can use by keeping the top section of the spoon still and stirring at the bottom - that keeps the base moving on the bottom of the pan without disturbing the oil on top. leave the base essentially undisturbed for between 1 and 3 hrs. the oil will rise. it may even be a good idea to got out or do something else as there is always an urge to stir and u don't really need to.
the key reqt's are lots' of water, v.low heat and plenty of time.
-
I was told that the gravy we were about to make is used in about 80% of their curries.
976bar,
can u give any examples of which curries are in the 20% category
-
I was told that the gravy we were about to make is used in about 80% of their curries.
976bar,
can u give any examples of which curries are in the 20% category
Hi Jerry,
LOL, that was part of the speil that went with the link, I did not write it, I just forgot to delete it when I copied the link. Sorry :)
-
Ah, that explains a lot!
-
So do tell us 976bar, did you ever find the missing oil ?
-
In the end I decided on the revised SnS base...I followed the instructions to the letter and started to cook my base. I add the 500ml of oil as I wanted to reclaim the oil for further use in my curries.
But doesn't SnS's recipe say to add 200ml of oil? In which case you didn't "follow it to the letter" did you? :-\
However, having established that, you probably now need to simmer it for longer to release that extra oil.....otherwise it will anyway come out when you cook the final curries. The risk is that they all taste very oily because of it!
Where has it all gone wrong? and what can I do with this base now?
Maybe with not following the recipe 976bar? And, consequently, please see above
-
In the end I decided on the revised SnS base...I followed the instructions to the letter and started to cook my base. I add the 500ml of oil as I wanted to reclaim the oil for further use in my curries.
But doesn't SnS's recipe say to add 200ml of oil? In which case you didn't "follow it to the letter" did you? :-\
However, having established that, you probably now need to simmer it for longer to release that extra oil.....otherwise it will anyway come out when you cook the final curries. The risk is that they all taste very oily because of it!
Where has it all gone wrong? and what can I do with this base now?
Maybe with not following the recipe 976bar? And, consequently, please see above
You nearly had me there mate, but if you follow the link on the recipe I used, it definitely says 2 cups (500ml) :)
-
if you follow the link on the recipe I used, it definitely says 2 cups (500ml) :)
My apologies 976bar, so it does....I was looking at the "SnS base" and not the "Saffron base".....
-
if you follow the link on the recipe I used, it definitely says 2 cups (500ml) :)
My apologies 976bar, so it does....I was looking at the "SnS base" and not the "Saffron base".....
You did have me worried for a minute :)
-
well impressed on your saffron visit - i love the base.
on the oil all u need is here http://www.curry-recipes.co.uk/curry/index.php?topic=2684.0
(http://www.curry-recipes.co.uk/curry/index.php?topic=2684.0)
i always take the oil off before blending nowadays to avoid the phaffing.
the way to get the oil out is to add a lot of water - try 500ml 1st followed by upto say a further litre. get the base on low simmer and stir very little. there is a stir action that u can use by keeping the top section of the spoon still and stirring at the bottom - that keeps the base moving on the bottom of the pan without disturbing the oil on top. leave the base essentially undisturbed for between 1 and 3 hrs. the oil will rise. it may even be a good idea to got out or do something else as there is always an urge to stir and u don't really need to.
the key reqt's are lots' of water, v.low heat and plenty of time.
Many thanks to Jerry and everyone else who helped me out here. I finally got round to adding the water yesterday afternoon and simmering for around 2 1/2 hours to get the oil to separate. Please see photos below. I ended up with about 350ml of reclaimed oil and a nice base to which I am going to make curry this evening.
Once again many thanks for the help guys!! :)
-
976bar,
well pleased. i know hard to believe - but the saffron is one of the easiest to reclaim from. some are real stubborn (coconut seems to an offender). i also think the saffron produces the best oil - quite a suprise given the simple spice mix.
next time give it a go at taking off before blending. i split my cooking 2 hrs before and 1 hr after blending. on the last saffron batch i used 1000ml oil and reclaimed 920 ml. i was aiming at 60ml per portion and ended up having left over oil. on the last base i aimed for 45ml per portion and was a tad short so intend to settle at say 50ml.